Sito italiano English site

 

Products

We develop our products to satisfy both reliability and safety requirements in harsh environments. Sectors we operate in are railway, aerospace and industrial automation.

SC Dual Isolated CPU module

The module has a 2oo2 based redundant architecture processing unit. It hosts two Texas Instruments “Delfino” floating point DSPs.

The module comes with software libraries to make available all the safety functions and a real-time scheduler to support the customer applications.

  • Two TI TM320F28335 32bit DSC based independent processing channels
  • All DSC functions available to user through two 100 pins connectors
  • Galvanic isolation between channels
  • Clock up to 150 MHz
  • 34K+1M x 16bit di SRAM
  • 256K+512K x 16bit di FLASH
  • 64K x 16bit di NVRAM
  • Two 8 channel 12bit DAC
  • Two Real Time Clock with back up options
  • Two temperature sensor
  • Power supply voltage monitor
  • System clock frequency monitor
  • Reference voltage monitor
  • High speed and isolated communication interchannel
  • Two diagnostic RS232 serial ports
  • Wide power supply input voltage range: 6V to 20V
  • Mountable on 19" 3U racks
  • MTBF calculation using MIL HDBK-217

 

Learn more...

 

SC Force module

The module hosts two separated power lines fitted with two “vital” switches. Each line can be safely break by its own switch.

The first operates as control switch of a system with three output voltage programmable power supplies. The second switch has its input and output terminals available on connector contacts for the customer’s applications.

The module is intended to be connected with the CPU module and to the customer’s application board

  • Two vital switches for breaking power lines
  • Three output voltages programmable power supplies with safety monitors
  • When coupled to CPU module it replicates all CPU functions pins
  • Isolated power outputs
  • Isolated I2C bus
  • Switches vitality monitor
  • Power supplies voltage and current monitors
  • Wide power supply input voltage range: 10V to 64V
  • Mountable on 19" 3U racks
  • MTBF calculation using MIL HDBK-217

Learn more...

 

SC AOI - Analog Opto Isolator module

Hybrid technology, low power consumption module to cross the isolation barrier with analog signals.

Factory laser trimming provides high output signal accuracy.

  • Gain error: ±0.5% (Laser trimmed)
  • Bandwidth: 0÷10kHz –0.5dB
  • Input voltage range: 0.25V to 2.25V
  • Output voltage range: 0.25V to 2.25V
  • Supply voltages range: 2.7V to 5.5V
  • Low power consumption
  • EMI/RFI emissions free
  • 500Vrms isolation between input and output
  • Wide operating temperature range: –40°C to +100°C

 

Download datasheet

Learn more...

 

SC DIAIN - Dual Isolated Analog INput module

Low power consumption module to cross isolation barriers with up to four analog signals.

  • Four analog input channels
  • Two isolated input areas
  • Input voltage range: ±1V
  • Voltage transfer gain: 1
  • DC non linearity: better than 0.5%
  • Bandwidth at -0.5dB: 0÷10kHz
  • Supply voltage range: 3V to 5.5V
  • Low power consumption
  • Isolation between I/O and I/I: 500Vrms
  • Wide operating temperature range: –40°C to +100°C
  • EMI/RFI emissions free
  • Vertical or horizontal mounting option

Download datasheet

Learn more...

 

SC QIPS - Quad Isolated output Power Supply module

The module delivers, in a very small space, 8 isolated output voltages, individually regulated, and overload protected. Its features makes it the ideal choice to power supply circuits across the isolation barrier.

  • Two independent power supplies
  • Four isolated regulated outputs from each power supply
  • Separated enable command for each power supply
  • Wide input voltage range: 4V to 16V
  • Independent overcurrent protection on each output
  • Up to 800mW total output power
  • No minimum load required
  • Thermal protection
  • Input/Output and Output /Output Isolation 500Vrms
  • Wide operating temperature range: –40°C to +85°C
  • Vertical or horizontal mounting option

 

Download datasheet

Learn more...

Contacts

 
EULEGO S.r.l.
Legal and head office
Via C. G. Massaia, 83
10147 - Turin (TO) - Italy
Phone +39 011 23036 27
Fax +39 011 23036 45
 

Maps and further information

 
 

© 2014  EULEGO srl - VAT # 09664510014 - Last update: 31-03-14; for site comments please contact webmasterATeulego.com