Sito italiano English site


Supporting the Hardware engineering

The realisation of safety-critical system impose rigid bonds between concept, design and development phases. Eulego can help you through all phases of hardware design starting from the concept to the definition of an appropriate architecture and eventually to the production phase. All the activities concerning the development of the system, sub-system or board, are carried on according to the applicable reference standards (CENELEC, IEC, MISRA, ISO, etc.) and integrated with RAMS analysis to state the behaviour of the vital parameters related to the insurgence of one or more faults.

EULEGO implements architecture both for fail-safe and fault-tolerant operation. A fail-safe architecture is one that, in the event of failure, responds in a way that will cause no harm, or at least a minimum of harm, to other devices or danger to personnel. A fault-tolerant architecture is a design that enables a system, when some part of the system fails, to continue its intended operation, possibly at a reduced level, rather than failing completely, at least for the time required to repair the system.

The effectiveness of the solutions is analyzed applying FMEA/FMECA and FTA, accordingly to the customer requirements.

Hardware design and development for the railway applications is performed complying to the CENELEC standards: EN 50126, EN 50129, EN 50155, EN 50159 and EN 50121 to take account of the EMC issues.

EULEGO can help in every step of the hardware development:

  • feasibility and definition of the system technical specifications
  • architecture definition
  • design of the schematic and the EMC countermeasure, and prototypes implementation
  • design of the system mechanical parts
  • test and tuning of the prototype
  • documentation of the design, development, verification, test and production


For further information please call our offices or fill-in the online form.



Legal and head office
Via C. G. Massaia, 83
10147 - Turin (TO) - Italy
Phone +39 011 23036 27
Fax +39 011 23036 45

Maps and further information


© 2014  EULEGO srl - VAT # 09664510014 - Last update: 31-03-14; for site comments please contact